These are test images from a prototype of the macro adapter designed and made by Cyclopital3D for the Fuji W3 digital stereo camera. They were shot ten minutes after receiving the attachment in the mail and should not be construed as the best that can be done. Alignment and processing was done in multi conversion mode with StereoPhoto Maker. Most all shots were taken using a Vivitar 283 flash flash in f8 auto mode. Camera was set to ISO 100, f9, and forced flash.
These are test images from a prototype of the macro adapter designed and made by Cyclopital3D for the Fuji W3 digital stereo camera. they are images of a milkweed seedpod. Alignment and processing was done in multi conversion mode with StereoPhoto Maker. All shots were taken using a Vivitar 283 flash flash in f8 auto mode. Camera was set to ISO 100, f9, and forced flash.
These are test images from a prototype of the macro adapter designed and made by Cyclopital3D for the Fuji W3 digital stereo camera. Alignment and processing was done in multi conversion mode with StereoPhoto Maker and post processed with Paint Shop Photo Pro X3. All shots were taken using only natural light (no flash). Camera was set to ISO 100 and f3.7.
These are test images from a prototype of the macro adapter designed and made by Cyclopital3D for the Fuji W3 digital stereo camera. Alignment and processing was done in multi conversion mode with StereoPhoto Maker and post processed with Paint Shop Photo Pro X3. All shots (except the first one) were taken using a Vivitar 283 flash flash in f4 auto mode. Camera was set to ISO 100, f4, and forced flash. The images are from Shige's Japanese Cuisine and show the wonderful sushi dinner I had for my birthday.
These images were taken with an RBT X3A stereo camera and RBT Macro Stereo Attachment on Fuji Velvia 50 film. Magnification is from 1:3 to 1:1 and the stereo base is 11mm. Lighting is from either one or two Metz 32Z2 TTL flashes. The original slides were scanned on an Epson V700 Photo scanner and the anaglyphs manually created in Paint Shop Pro Photo X2.
These images are from a hike and hot springs soak I took with the Idaho Outdoors group to an area in southwest Idaho. They are my first images using a twin Canon A590IS rig controlled with StereoData Maker. I used the cameras mounted side by side so the minimum stereo base is 100mm and the maximum is 195mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align, correct, and create the anaglyphs. They are presented here just as they came out of the program. As you can see there are some window violations and other problems, but I wanted to show what SPM can do in auto mode.
These images are B&W HDR (high dynamic range) images that were taken August 14, 2009 at either the Old Idaho State Penitentiary or the Nampa Tractor Salvage. They were for a display at the 2009 Western Idaho Fair (only eight of the images were used). I used a Pentax K10D with a Pentax DA*16-50 lens on a Jasper Engineering slide bar to take the images. I used Photomatix Pro to combine the raw images and tone map, and Paint Shop Pro Photo X2 for all post processing and creation of the anaglyphs.
These are images from the January 9, 2010 Idaho Parks and Recreation Free Trail day. It was an intermediate trip led by Owen Jones. It started at Beaver Creek Summit and ended up at the Banner Ridge Park-N-Ski lot. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the anaglyphs and Paint Shop Pro Photo X2 to post process.
These images were taken December 18-24, 2009 while attending my son's (Talon) graduation from the University of Hawai'i Hilo. They are from the Big Island of Hawai'i and Oahu. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the anaglyphs and Paint Shop Pro Photo X2 to post process.
These images were taken December 18-24, 2009 while attending my son's (Talon) graduation from the University of Hawai'i Hilo. They are from the Big Island of Hawai'i and Oahu. I used a Pentax K10D with a Pentax DA*16-50 lens and a Jasper Engineering slide bar to capture the left and right images. All these are five exposure HDR images and I used Photomatix Pro to combine the raw images and tone map. I used StereoPhoto Maker in the multi-conversion mode to automatically align and create the anaglyphs. I used Paint Shop Pro Photo X2 and Topaz Adjust to post process.
Riebe's Shoe Shop has been in business since 1863 and in Boise, Idaho since 1903. It is now located in a section of Boise called Hyde Park. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the half color anaglyphs.
These images were taken March 20, 2010 on the IVMC ride. It started out at the Caldwell, Idaho city park and rode around Lake LowelI and down by the Snake River. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the anaglyphs and Topaz Adjust 4 to post process.
These images were taken March 21, 2010 at the IVMC show. It was held at the O'Connor Field House in Caldwell, Idaho. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the anaglyphs and Topaz Adjust 4 to post process.
I am beta testing the new Loreo 9005A LIAC and these are the images from those tests. Keep checking back as I will be adding more. For details on the lens and test methods check my web page here.
This trip to Succor Creek State Park in Oregon was organized by the Gem State Grotto on April 22-25, 2010. In addition to the Grotto sponsored camping and meal plan individuals offered other activities such as rappelling, caving, hiking, rock hounding, and the very popular Tyrolean that spanned the 200+ foot wide and 165+ foot tall canyon over and back. Stereo images of this weekend will be available soon so check back for those albums.
This trip was to the Honeycombs on Lake Owyhee over Memorial Day weekend 2010. Because the water level was too low to use the Leslie Gulch boat ramp, both boats came in from Owyhee Dam. Once camp was set up we did day hikes into the interior of the Honeycombs. Many thanks to Owen Jones for organizing the trip and Owen and Dave May for providing the boat rides. The landscape images were taken with a Pentax K10D on a Jasper Engineering slide bar.
This trip was to the Honeycombs on Lake Owyhee over Memorial Day weekend 2010. Because the water level was too low to use the Leslie Gulch boat ramp, both boats came in from Owyhee Dam. Once camp was set up we did day hikes into the interior of the Honeycombs. Many thanks to Owen Jones for organizing the trip and Owen and Dave May for providing the boat rides. I used a Pentax K10D with a Loreo Macro LIAC to take the images. I used StereoPhoto Maker in the multi-conversion mode to automatically align and adjust the raw images, and create the anaglyph.
These images were taken May 12-15, 2010 while on a business trip to Niagara Falls, Canada. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files and create the anaglyphs.
These images were taken July 10-19, 2010 while attending the NSA Convention. I used a Pentax K10D with a Pentax DA*16-50 lens and a Jasper Engineering slide bar to capture the left and right images. All these are five exposure HDR images and I used Photomatix Pro to combine the raw images and tone map. I used StereoPhoto Maker in the multi-conversion mode to automatically align and create the anaglyphs.
These images were taken July 13-19, 2010 while attending the NSA Convention in Huron, Ohio. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files and create the anaglyphs.
These images were taken July 10-19, 2010 while attending the NSA Convention. I used a Pentax K10D with a Loreo Macro LIAC to take the images. I used StereoPhoto Maker in the multi-conversion mode to automatically align and adjust the raw images, and create the anaglyph.
These images were taken by my friend Ron Labbe of Studio 3D with the Fuji W1 3D camera. They are of Brian May (founding member and lead guitarist of Queen) looking at my display in the Art Gallery of the 2010 NSA Convention.
The 2010 Hot Rods and Hogs Cruise in at the High Desert Harley Davidson Dealership in Meridian, Idaho. This year the proceeds went to the Idaho Veteran's Cemetery. These images were taken with a Fuji W3 stereo digital camera. I used StereoPhoto Maker in the multi-conversion mode to automatically align and adjust the raw images, and create the anaglyph.
The 2010 "Art in the Park" event sponsored by the Boise Art Museum and held in Julia Davis Park, Boise, Idaho. These images were taken with a Fuji W3 stereo digital camera. I used StereoPhoto Maker in the multi-conversion mode to automatically align and adjust the raw images, and create the anaglyph.
These images were taken September 18, 2010 at the Silver City, Idaho open house. Once a year a group of the residents open their houses for tours. They charge a small fee with all proceeds going to help pay for a winter care taker. Many of the residents dress up in period costumes and provide snacks and drinks along with detail historical facts about the town, their families, and the area. All images were taken with a Fuji W3, aligned and formatted with StereoPhoto Maker and post processed with Paint Shop Pro Photo X3 and Topaz Adjust.
These images were taken at a Halloween party October 30, 2010 at a friend's home. All images were taken with a Fuji W3, aligned and formatted with StereoPhoto Maker and post processed with Paint Shop Pro Photo X3.
These images are from an early Thanksgiving at my In-Laws 11-20-2010. There are some macro shots of a fish tank I took while waiting for dinner. Most all images were taken with a Fuji W3 and Cyclopital3D Macro Adapter and Vivitar 283 flash, aligned and formatted with StereoPhoto Maker and post processed with Paint Shop Pro Photo X3 and Topaz Adjust.
These are images from the January 8, 2011 Idaho Parks and Recreation Free Trail day. It was an intermediate trip led by Owen Jones. It started at Beaver Creek Summit and ended up at the Banner Ridge Park-N-Ski lot. I used a twin Canon A590IS rig controlled with StereoData Maker. The cameras were mounted side by side in a custom Z-Bar with a stereo base of 80mm. I also used StereoPhoto Maker in the multi-conversion mode to automatically align and correct the raw files, and create the anaglyphs and Paint Shop Pro Photo X2 to post process.
